Product Overview
This large antique beauty has been missing for years. Nobody has made this item in a very long time. These were salvaged from an old warehouse that had burned down. We literally dug them out of the ashes. We ran them through a vibratory sand shaker to remove the burnt paint and ashes to show what they look like cleaned up. We guarantee that they have lots of rust on them as we have not re-painted them. THE BOLTS ON BACK MAY NEED THE THREADS CLEANED WITH A WIRE BRUSH TO FREE THE NUT AND MAKE IT OPERATIVE. If you have a restoration project that requires a look like this, get them while you can. Screw made to Hook, will fit up to 1 1/8" material. NOTE: Some of these may be painted black. YOU GET WHAT YOU GET. WE JUST CLEANED THE MUD AND ASHES OFF. Centers: One Screw Total Dimensions: 5 1/2" x 8" x 4" (140 mm x 203 mm x 102 mm) Base Dimensions: 1 3/8" diameter (35 mm) Hook Width: 5/16" (8 mm) Mounted: Back Finish: Flat Black or Bare Cast Iron D. Lawless HardwareH27-C2576
